Selection Skills Of Stainless Steel Cutting Sewage Pump

1. Determine the voltage

380V (three-phase), 220V (single-phase)

Note: When there is three-phase voltage, it is preferred to use three-phase electricity, because the three-phase voltage is more stable, which is conducive to the better performance of the machine. There will be a certain voltage drop in single-phase electricity, and if the voltage drop is too large, it will affect the performance of the machine.

2. Determine the lift

The lift of the pump refers to the height that the pump can lift water. It is an important working performance parameter of the pump, also known as the pressure head. (Unit: m) This height refers to the vertical height, that is, the vertical height between the liquid level and the extraction point.

3. Determine the distance

is the horizontal distance extracted (unit: meters)

4. Determine the power

Select the corresponding power (unit: watt, W) according to the actual needs. When selecting the power, many factors need to be considered (for example, the viscosity of the fecal liquid, the pumping head and distance, etc.)

5. Determine the flow

The flow rate of the sewage pump should be selected according to the discharge second flow rate, (measurement unit: L/s); when there is a discharge volume adjustment, it can be selected according to the discharge size, (measurement unit: m3/h).